top of page

Storm

BOLT

Bolt cables are power cables that carry the raw material that will be worked on and turn into the most beautiful melody at the end of the process. A suitable power cable makes the electrons leave your power source and reach your equipment with minimal possible loss, meeting the energy demand effortlessly.  

Bolt Diamond – Viborg Diamond Plugs

Cables for fast signals with double shield, with high purity copper conductors with 5 mm² per pole. Low capacitance and inductance. Plug with Bayer-2805 plastic body (Germany Made) and gold-plated connectors.

 

Braided Diamond Bolt – Viborg Diamond Plugs

Twisted, unshielded cables with high-purity copper conductors measuring 5 mm² per pole. Low capacitance and inductance. A new concept of power cord, with more body and extension. A new idea with the possibility of disconnecting the ground by means of a Plug key with a Bayer-2805 plastic body (Germany Made) and gold-plated connectors.

Bolt Trançado

Twisted cables, unshielded, with high purity copper conductors with 6 mm² per pole. Low capacitance and inductance. A new power cable concept, with more body and extension. An innovation with the possibility of disconnecting the ground using a switch. Furutech FI 11 plugs, with contacts in pure copper or plated in gold or rhodium. 

Bolt Blindado

Cables for fast signals with double shielding, with high purity copper conductors with 5 mm² per pole. Low capacitance and inductance. Furutech FI 11 plugs, with contacts in pure copper or plated in gold or rhodium. 

LIGHTNING

Signal cables that connect information sources to DACs, Preamps, Processors, and Amplifiers. They can be divided into two categories: Digital: Spdif, Toslink, AES/EBU, USB, among others Analog: Interconnects. They are critical components, as they carry a very low amplitude signal, subject to interference and coloring. A good signal cable carries information as unscathed as possible, protecting every bit, every wave cycle, and delivering that information unchanged to the next processing step. That's what Lightning Line cables do, take care of your beep and deliver it as pure as possible without loss of information.

  • Lightning I - RCA analog cable

  • Lightning II - Analog Cable XLR 

  • Lightning II P - XLR with Connector Pailiccs 

  • Lightning III – RCA or BNC Digital Cable, 75 Ohms impedance

  • Lightning IV – AES/EBU RCA/BNC or XLR cable, 110 Ohms impedance

THUNDER

Speaker cables that connect speakers to amplifiers. They are responsible for transporting the final result of the treatment and amplification to the transducers, those magical objects that fill our rooms with beauty and life. According to their construction, they can increase clarity, and definition, thicken the bass, or detail the treble. These are robust cables, often undervalued, but extremely important to the entire system. That's what Thunder Line cables do, they deliver all the power with the seasoning to the customer's taste. They can be chosen both for the characteristics of the loudspeakers and for the music taste of the connoisseur. For this, this line is divided into 3 types:

 

Thunder I

Structured, single-wired, or bi-wired cable — with characteristics to maintain detail while punching the bass, is often used to balance systems that favor the high or when the listener is looking for a deeper and more consistent bass.

Thunder 2

Braided, single-wired, or bi-wired cable — with characteristics to increase detail, especially in the high-frequency region, without attenuating the bass, usually used to balance systems that favor the bass or when the listener is looking for a clearer, livelier sound and detailed.

Thunderstorm

Bi-wired hybrid cable, for bi-wiring or bi-amping — combines the characteristics of the two previous cables, with the braided cable surrounding the structured, using the characteristics of the structured, with its improvement of the bass in the woofers and the braided, with its clarity and details for the mids and highs.

lightning I

RCA analog cable

Lightning II

XLR analog cable

Lightning III

Cable Type RCA or BNC, 75 Ohms impedance

Lightning IV

Lightning IV AES/EBU cable with RCA/BNC or XLR terminals, 110 Ohm impedance.

Thunder I

Structured cable, single wired — with features to maintain detail while boosting the bass, generally used to balance systems that favor the treble or when the listener is looking for a deeper and more consistent bass.

Thunder II

Twisted cable, single wired — with neutrality characteristics; detailing, increasing extension, especially in the high/medium frequency region, without attenuating the bass, generally used in balanced systems where the listener is looking for a sound clearer, more vivid and detailed.

thunderstorm

Bi-wired hybrid cable, for bi-wiring or bi-amplification — combines the characteristics of the previous two cables, with the braided cable surrounding the structure, combining the characteristics of the structure, with its improvement in the bass in the woofers and of the braided one, with its clarity and details for the mids and highs.

bottom of page